GB/T 18385-2005 Translated English of Chinese Standard. (GBT 18385-2005, GB/T18385-2005, GBT18385-2005): Electric vehicles - Power performance - Test methodhttps://www.chinesestandard.net, 18. maj 2015 - 19 sider This Standard specifies the test methods of operating characteristics such as speed, acceleration and hill climbing ability, etc. for pure electric vehicles. This Standard is applicable to pure electric vehicles. |
Indhold
| 3 | |
Scope | 4 |
Test Conditions | 6 |
Preconditioning of the Vehicle | 8 |
Test Sequence | 9 |
Annex A | 15 |
Annex B | 17 |
Almindelige termer og sætninger
Accelerate the vehicle Acceleration ability test acceleration in seconds accelerator pedal achieving the speed Air pressure kPa Annex arithmetical average article numbers authorized loading mass Chapter and article chassis dynamometer clutch and gear depressing the accelerator design total mass direction Wind speed electric bus fully depressing GB/T gear lever hill starting ability Immediately perform kilometres per hour km/h Acceleration ability kPa Wind direction Load mass Odometer Load the vehicle loop track mass Odometer indication maximum 30-minutes speed maximum authorized loading maximum design total measuring zone metres per second Odometer indication on-test pedal to achieving pressure kPa Wind pressure of tyre pure electric vehicles Record Chart Single direction test Slope of track Specification of tyre speed m/s Air speedometer Stot term and definition Test date Test test mass Test procedure Test site Weather test track traction battery tyre Air pressure uniformly distributed vehicle by fully vehicle manufacturer Weather Air pressure